알파라발 PlusClean ® 세정 장치가 위생 공정에서 탱크 클리닝에 혁명을 일으킬 수 있습니다. 상단 장착형 탱크 세정 장치와 페어링된 PlusClean ®은 탱크 벽 또는 바닥에 원활하게 통합됩니다. CIP(Cleaning-in-Place) 도중에 활성화되면 가압 청소fan으로 쉽게 세척되지 않는 영역을 세정합니다. 100% 세정, 물 및 세척제 비용이 최대 80% 절감되며, 세정후 오염 물질 0%를 보장합니다.

PlusClean tank cleaning nozzle

Boost product yield higher with unprecedented 100% tank cleaning coverage

  • Get 100% impact cleaning coverage
  • Up to 80% reduction in water and cleaning media consumption
  • Eliminate product contamination risks and raise product yield
  • Meet the highest hygienic requirements
  • Low total cost of ownership due to very low maintenance requirements and reduced water, cleaning media and wastewater costs

Thorough tank cleaning eliminates the risk of contamination which can affect the productivity of your hygienic processes. Using the easy-to-install Alfa Laval PlusClean® cleaning device effectively does away with virtually all contamination risks in your process tanks. With its optimized, high-impact spray pattern, the PlusClean® delivers 100% cleaning coverage in shadow areas, such as beneath agitator blades, coils and connections, that top-mounted tank cleaning devices miss. Faster, safer contaminant-free changeovers are now possible, boosting batch or continuous process productivity in the food, beverage and personal care industries. This increases product yield and speeds return on investment while lowering total cost of ownership.

PlusClean nozzle spray pattern 1
PlusClean nozzle spray pattern 2
PlusClean nozzle spray pattern 3

Extremely versatile

The PlusClean® optimizes the cleaning efficiency of the primary cleaning device, regardless of whether a static spray ball, rotary spray head or a rotary jet head. Depending on the overall design of your tank, you can configure the cleaning device either in the tank wall or on the tank bottom. Choose one of three different spray patterns and one of two different weld plates for mounting to customize your cleaning device to your requirements.

Special product line

In addition to the standard Alfa Laval PlusClean® with a piston activated by the cleaning media, a special pneumatic version is available. The pneumatic version activates the piston using controlled air pressure. When used together with the Alfa Laval ThinkTop, you have a full overview of your tank cleaning process, including feedback signals such as open/closed and purging option.


Count on extended equipment performance and more uptime due to low-wear components that are easy to replace on site, minimizing downtime. The PlusClean® cleaning device has no moving parts that extend into or retract from the tank. Durable, reliable genuine parts from Alfa Laval deliver outstanding performance, lower your total cost of ownership and preserve the value of your equipment throughout its entire life cycle.


How it works

The Alfa Laval PlusClean® cleaning device is installed flush with the tank wall and/or tank bottom. Activated either by the cleaning media or by controlled air pressure, the device creates a high impact force spraying cleaning media in a fan pattern directly onto the soiled area. Cleaning coverage is ensured through controlled and repeated rotation of the shaft and agitator blades.


Upon completion of the cleaning cycle, the integrated spring mechanism restores the piston to its original position, securely closing and sealing off the cleaning device. If purging is required, always operate with the actuator.





Safeguard cheese production with 100% cleaning coverage of tank shadow areas


To increase cheese production by expanding its milk reception, a large Scandinavian dairy turned to the Beritech Group, an experienced tank and system builder. The objective was to guarantee complete cleaning coverage for two new 30-metre-high raw milk silos with bottom-mounted agitators.


Read the case story here

Cheese factory 640X360.jpg


100% cleaning coverage

How clean is your tank?

Alfa Laval PlusClean® and Alfa Laval PlusClean® UltraPure is a revolution in hygienic tank cleaning. When activated during Cleaning-in-Place (CIP), PlusClean hits shadow areas with a fan of pressurized cleaning media, giving you the market’s first guarantee of 100% impact cleaning coverage.

PlusClean brochure image 640x360

360° Service and maintenance videos

How to assemble the Alfa Laval PlusClean®

How to disassemble the Alfa Laval PlusClean®

You might also be interested in…


The TJ range of rotary jet heads is designed for hygienic applications such as food, dairy, beverage and personal care. Available in various sizes and different configurations covering any tank size.

TJ series rotary jet head

SaniMagnum SB

Sani SB are designed and certified according to EHEDG and authorized to carry the 3A symbol.

SaniMagnum SB 640x360

Agitator ALT

The Alfa Laval ALT top-mounted agitator is suitable for atmospheric and pressurized tanks and meets requirements in food, dairy, beverage, pharmaceutical, biotechnology and cosmetic applications.

ALT 顶入式搅拌器-ALT top-in agitator

푸드 로직

알파라발의 위생 장비는 아래와 같은 식품 산업의 트렌드를 지원하고 주요 과제를 해결하기 위해 노력합니다.  경쟁력있는 가격으로 식품 공급  원료를 최대한 활용  폐기물 및 탄소 배출 절감  안전하고 위생적인 식품 공급

food logic 640x360

제품 카탈로그

최신 'Close at hand' 종합 제품 카탈로그의 온라인 버전 (영문) 입니다.

Close at hand 2019 - Cover image 640x360

CAD 포털

중립 또는 네이티브 CAD 파일 형식으로 제품 모델을 다운로드하십시오. 3D PDF 파일도 다운로드할 수 있습니다.

 CAD 포털 보기 

Near 뉴스레터

사업 영역 및 공정의 주요 지속 가능성 문제와 기회에 대한 최신 소식을 받아 보세요.

더 알아보기

기술 문서